Common Appliance Repair Solutions
|
Main
|
|
 Whirlpool washer agitator repiar
Good advice but I had a hard time getting the upper and lower agitators apart. Instructions on how to get these parts apart if they stick would help
Bob [2009-09-03] |
|
Agitator Removal
|
Absolutely great! It gave me the information i needed to get the job done.
[2009-05-16] |
|
Replacing agitator dogs
Wow who would of thought that I could fix my own washer for under $5 bucks,..Thanks for the info it helped me tremendously, very easy to follow and do.
Yolanda R. [2008-09-04] |
|
Washer Dog ears.
The information you have regarding Whirlpool agitator problems could not be stated better. It really cleared up the problem I had with taking the upper part off. I only needed to replace the dog ears. Who wooulda thunk that's all it took. Thank you so much for the expert advice. Makes me feel as if I am somewhat useful. I'm bookmarking your page. It's the best I saw on the subject.
charles [2008-02-01] |
|
Repair help
Superb! I went from totally agitated to calm and competent in 10 minutes! Thank you.
S. Raghavan [2008-01-25] |
|
Thanks so much! This was a great help. Although I did have a very, very hard time taking the top half off. The top would not budge, no matter how hard I tried. Finally, frustrated and mad I used a hammer and it finally came apart! Wee... everything from there on was as easy as pie.
kh [2007-12-06] |
|
Agitator Repair
Very good instructions. I had the dogs replaced and back together in 10 minutes. Thanks!!!!!!
Linda Milgrim [2007-10-05] |
|
great advice
Thanks for the great step-by-step. It worked great, part only cost $9.75 and the repair man wanted $65.00 just to come out.
Saved lots of money cause of you guys, thanks again.
Tarun Gaur [2007-10-04] |
|
Dog replacement
I could not have done it without repair help. Thanks again, George
George Denty [2007-09-17] |
|
Go figure
Through a female's eyes in repairing a "cam" on anything seems very labor intensive. Once I read your article I ran downstairs and was done in 3-4 minutes, if that.
Kelli Terrell [2007-08-28] |
|
Whirlpool washer agitator repiar
I found this repiar advice was EXACTLY what I needed. Many thanks
Tom Heath [2007-08-26] |
|
ABSOLUTLY PERFECT
[2007-05-19] |
|
how to install an agitator cam
I was stumped, spent over an hour trying to figure out how to remove the agitator stud.
One Click on your site and I was done in five minutes. You will be my first site from now on.
Thanks
Danny Gleason [2007-02-04] |
|
OUTSTANDING ADVICE
As Gomer Pyle would have said, "Thank you, Thank you, Thank you." I saved a 50-dollar service call by dismantling the agitator and taking it to the appliance company in Munford (Tennessee). Directions and exploded pictures were wonderful. Had it in and out in minutes. Advice was "right on!!"
John Cunningham [2007-01-10] |
|
repair help
EXCEPTIONAL ADVICE... Thank you... thank you.
The Internet... what a wonderful thing...
Appreciate the advice and competitive pricing!!
Shane
Shane David [2006-12-11] |
|
We would appreciate your comments on this article. Was it helpful to you? How can we improve its content? Did you successfully complete your repair with this information? Your input is what helps us to become better.
|
Notice:
This form should only be used to submit comments regarding the article you were viewing. If you have a diagnostic question, it should be submitted using the Diagnostic Questionnaire
|
|
|
|
|
|
|
|
