Common Appliance Repair Solutions

Main ::Dishwasher Repair Solutions ::Water does not fill   Water does not fill Diagnostic Articles The following article(s) have been identified as some of the solutions related to the category you selected. For diagnosis, these articles are usually the most common causes of the symptom you have selected. Each article contains details specific to that potential cause. Defective Timer The timer is a series of switches that controls all machine functions. If one of the contacts in the timer is defective, the machine will lose that function. knowledge of the - 2006-10-26 - Similar Articles Defective water inlet valve If there is 110v across the two wires on the water inlet valve when the machine is set to fill, the valve should open and the water should enter into the machine. If the water - 2006-10-26 - Similar Articles Float Switch The float switch allows water to enter into the machine to a point where the float will rise up off of the switch and disconnect power to the water inlet valve. If the switch - 2006-10-26 - Similar Articles Water Source Turned Off Check to ensure the water source is turned on and water is getting to the water inlet valve. - 2006-10-26 - Similar Articles Diagnostic Questions Our goal is to make this knowledge base as useful as possible. If you don't see a category that addresses your appliance, feel free to ask a diagnostic question. We will email you a response and post the answers to such questions within the knowledge base to improve its content and assist you with your repairs. We do not answer diagnostic questions via telephone so please use the link above to contact us regarding diagnostic questions.

Search Glossary Saved Article